We can offer copper and brass rods of different sizes with quality and tolerances according to EN 12163, 12164, 12165, 12167, 13601 and other international standards and special requirements (special mechanical properties, tighter tolerances, specific requirements surface quality, etc.), which are defined by special technical norms.
Range
| Type | Rolled stock |
Dimensions mm |
Form of delivery |
|
Copper |
Cu-HCP Cu-ETP Cu-DHP |
Flat rods | Thickness: 2 - 25 Width: 5 - 120 * |
Coils or bars depending on the thickness |
| Round rods | 3,0 - 80 | |||
| Square rods | 4,0 - 50 | |||
| Hexagonal rods | 4,0 - 65 | |||
| Low -alloyed copper and lead-free brass | CuNi1, 5Si CuNi2Si CuZn10 CuZn20 CuZn28 CuZn30 CuZn33 CuZn37 CuZn40 |
Flat rods | Thickness: 2 - 15 Width: 5 - 60 * |
Coils or bars depending on the thickness |
| Round rods | 3,0 - 80 | |||
| Square rods | 4,0 - 50 | |||
| Hexagonal rods | 4,0 - 60 | |||
| Lead Brass | CuZn36Pb1, 5 CuZn36Pb3 CuZn38Pb2 CuZn39Pb2 CuZn39Pb3 CuZn40Pb2 |
Flat rods | Thickness: 2 - 15 Width: 5 - 60 * |
Coils or bars depending on the thickness |
| Round rods | 3,0 - 80 | |||
| Square rods | 4,0 - 40 | |||
| Hexagonal rods | 4,0 - 65 | |||
| Hollow bars (round and hexagonal) | by the buyer | |||
| * Depending on the thickness | ||||
Names for copper and brass and standards for the production of rods and rails
| EN | EN product |
The names in other standards | |||
| Brand | Number | DIN | ASTM | ||
| Brand | Number | ||||
| Cu-HCP | CW021A | EN 13601 EN 12165 |
SE-Cu | 2.070 | C 10 300 |
| Cu-ETP | CW004A | EN 13601 EN 12165 |
E-Cu58 | 2.0065 | С 11 000 |
| Cu-DHP | CW024A | EN 12163 EN 12165 EN 12167 |
SF-Cu | 2.0090 | С 12 200 |
| CuNi1Si | CW109C | EN 12163 EN 12165 |
CuNi1, 5Si | 2.0853 | - |
| CuNi2Si | CW111C | EN 12163 EN 12165 |
CuNi2Si | 2.0855 | - |
| CuZn10 | CW501L | EN 12163 | CuZn10 | 2.0230 | С 22 000 |
| CuZn20 | CW503L | EN 12163 | CuZn20 | 2.0250 | С 24 000 |
| CuZn28 | CW504L | EN 12163 | CuZn28 | 2.0261 | - |
| CuZn30 | CW505L | EN 12163 | CuZn30 | 2.0265 | С 26 000 |
| CuZn33 | CW506L | EN 12163 | CuZn33 | 2.080 | C 26 800 |
| CuZn36 | CW507L | EN 12163 EN 12167 |
CuZn36 | 2.0335 | С 27 000 |
| CuZn37 | CW508L | EN 12163 EN 12165 EN 12167 |
CuZn37 | 2.0321 | С 27 200 |
| CuZn40 | CW509L | EN 12163 EN 12165 EN 12167 |
CuZn40 | 2.0360 | С 28 000 |
| - | - | - | CuZn36Pb1, 5 | 2.0331 | С 35 000 |
| CuZn36Pb3 | CW603N | EN 12164 EN 12167 |
CuZn36Pb3 | 2.0375 | С 36 000 |
| CuZn38Pb2 | CW608N | EN 12163 EN 12164 EN 12165 EN 12167 |
CuZn38Pb1, 5 | 2.0371 | - |
| CuZn39Pb2 | CW612N | EN 12164 EN 12165 EN 12167 |
CuZn39Pb2 | 2.0380 | C 37 700 |
| CuZn39Pb3 | CW614N | EN 12163 EN 12164 EN 12165 EN 12167 |
CuZn39Pb3 | 2.0401 | - |
| CuZn40Pb2 | CW617N | EN 12163 EN 12164 EN 12165 EN 12167 |
CuZn40Pb2 | 2.0402 | C 37 800 |
